GE DigitalFlow GS868, Programming Manual

Page: 89 / 171

Logging Data 3-11
March 2008
STARTTIME Prompt (cont.)
a.
Press
[F1]-[F2]
to select
AM
or
PM
. Then, enter the desired Hour
(1-12) and press
[ENT]
. (Entry of a start time earlier than the
current time will generate an error message.)
b.
Enter the desired Minutes and press
[ENT]
. The acceptable
range is 0 to 59.
c.
Enter the desired Seconds and press
[ENT]
. The acceptable
range is 0 to 59.
START DATE Prompt
11.
Press
[F1]
to accept the displayed Start Date or press
[F2]
to enter a
different start date. To start logging today, press
[F3]
.
•
If
OK
or
TODAY
was selected, you have finished setting up the
error log. Proceed to Procedure Options below.
•
Otherwise, complete the following steps to Edit the Start Date.
a.
Enter the desired Year and press
[ENT]
. The acceptable range is
0 to 99.
b.
Use the [
←]
, [
→]
and
[F1]-[F4]
keys to select the desired
Month .
c.
Enter the desired Day and press
[ENT]
. The acceptable range is
1 to the number of days in the selected month (28, 29, 30 or
31).
Procedure Options
You have completed setting up the error log. Do one of the following:
•
Use [
↑]
and [
↓]
to review the previous menu prompts.
•
Press
[F1]-[F4]
to select one of the
LOG
submenus.
•
To return to the data screen and begin logging data, press the
[ENT]
key. The * on the locator bar indicates that the Model
GS868 is now compiling the specified error log.
The error log will continue to run until it is manually stopped, the
meter runs out of memory (for a non-circular log), or the entire 120
records (2 pages x 60 records/page) have been logged.