GE DigitalFlow GS868 Programming Manual Download

Page: 23 / 171

Programming Site Data

1-15

March 2008

Procedure Options

After completing the above steps, the meter returns to the

Channel

PROGRAM

prompt. Continue as follows:

•

To continue programming the meter, refer to the menu maps in
Appendix A of the

Programming Manual

and navigate to the

desired menu. Then, proceed to the appropriate section of the
manual for instructions.

•

To leave the

User Program

and retain the previous settings,

press

[EXIT]

twice and then press

[F1] = NO

at the

SAVE

prompt.

Any programming changes will be discarded and you will be
returned to the data display.

•

To leave the

User Program

and return to measurement mode,

press

[EXIT]

twice and then press

[F2] = YES

at the

SAVE

prompt.

Your programming changes will be entered into the meter’s
memory, and you will be returned to the data display.

Summary of Contents for DigitalFlow GS868












































































































































































Search results

Summary of Contents for DigitalFlow GS868

Reviews:

Related manuals for DigitalFlow GS868

Brands by name

Popular brands

GE DigitalFlow GS868, Programming Manual

Search results

Summary of Contents for DigitalFlow GS868

Reviews:

Related manuals for DigitalFlow GS868

Brands by name

Popular brands