GE DigitalFlow GS868, Programming Manual

Page: 37 / 171

Programming Site Data 1-29
March 2008
Setting the Clock
Use the
CLOCK
submenu to enter the current date and time. While
following the programming instructions, refer to the menu map in
Figure A-3 on page A-3.
1.
To enter the
CLOCK
submenu, press
[F1]
at the
Global PROGRAM
prompt.
Setting the Date
2.
The first prompt displays the programmed Date.
•
If the displayed date is correct, press
[F1] = OK
and proceed to
step 2.
•
If the displayed date is incorrect, press
[F2] = EDIT
to change the
date, and complete the steps below.
a.
Enter the current year and press
[ENT]
. The allowable range is 0
to 99.
b.
Use the [
←]
, [
→]
and
[F1]-[F4]
keys to select the current month.
c.
Enter the current day and press
[ENT]
. The allowable range is 1
to the number of days in the current month.
Setting the Time
3.
The next prompt displays the programmed Time .
•
If the displayed time is correct, press
[F1] = OK
to return to the
GLOBL
prompt.
•
If the displayed time is incorrect, press
[F2] = EDIT
to change the
time, and complete the steps below.
a.
Press
[F1] = AM
or
[F2]
=
PM
. Then enter the current Hour and
press
[ENT]
. The allowable range is 1 to 12.
Note:
A time of 12 PM represents Noon and a time of 12 AM
represents Midnight.
b.
Enter the current Minutes and press
[ENT]
. The allowable range
is 0 to 59.
4.
Enter the current Seconds and press
[ENT]
. The allowable range is
0 to 59.