GE DigitalFlow GS868, Programming Manual

Page: 40 / 171

March 2008
1-32 Programming Site Data
Entering Volumetric Data
5.
Use the
[F1]-[F4]
and [
→]
keys to select the desired Volumetric
Units for the flow rate display.
The abbreviations and definitions of all the available volumetric and
totalizer units are shown in Table 1-7 below. The choices shown on
the option bar are determined by the selection made at the previous
SYSTEM UNITS
screen.
6.
Use the
[F1]-[F4]
keys to select the Volumetric Time (units for the
volumetric flow rate display).
7.
Use the
[F1]-[F4]
keys to select the Vol Decimal Digits (the desired
number of digits to the right of the decimal point) in the
volumetric flow rate display.
Entering Totalizer Data
8.
Use the
[F1]-[F4] and
[
→]
keys to select the Totalizer Units.
The abbreviations and definitions of all the available volumetric and
totalizer units are shown in Table 1-7 above. The choices shown on
the option bar are determined by the selection made at the previous
SYSTEM UNITS
prompt screen.
9.
Use the
[F1]-[F4]
keys to select the Total Decimal Digits (the
desired number of digits to the right of the decimal point) in the
totalized flow display.
Table 1-7: Available Volumetric/Totalizer Units
English Metric
Actual Units
ACF = Actual Cubic Feet ACM = Actual Cubic Meters
KACF = Thousands of ACF KACM = Thousands of ACM
MMACF = Millions of ACF MMACM = Millions of ACM
Standard Units
SCF = Standard Cubic Feet SCM = Standard Cubic Meters
KSCF = Thousands of SCF KSCM = Thousands of SCM
MMSCF = Millions of SCF MMSCM = Millions of SCM