26
GE Information
D.20 RIO - HARDWARE USER’S MANUAL
PANEL MOUNTING THE D.20 RIO
CHAPTER 2: INSTALLING THE D.20 RIO
Figure 4: Rack mount flanges
3.
Position the D.20 RIO in an open space in the rack.
4.
Hold the unit firmly and attach the unit to the rails of the rack using four Phillips pan-
head M5 x 8 mm screws (GE part number 900-0215).
Panel mounting the D.20 RIO
The D.20 RIO can be flat mounted on a panel by installing the panel mounting flanges.
To install the D.20 RIO
on a panel:
1.
Attach the panel mount flanges (GE part number 953-4132) to the left and right sides
of the device as shown below using the four screws that were provided with the
flanges.
See “Panel mount flanges” on page 26
Figure 5: Panel mount flanges
2.
Attach the unit to a panel using four Phillips pan-head M5 x 8 mm screws (GE part
number 900-0215). Tighten to 0.5 Nm.
