CHAPTER 4: SETTING UP THE D.20 RIO
REMOTE AUTHENTICATION
D.20 RIO - HARDWARE USER’S MANUAL
GE Information
45
To access the D.20 RIO
HMI over a network
connection
1.
Open your Web browser and enter the URL (in the form of
http://aaa.bbb.ccc.ddd)
of
the D.20 RIO, where aaa.bbb.ccc.ddd is the D.20 RIO's IP address.
Result: The
Log In
screen appears.
2.
Type your HMI Supervisor user name and password. The default user name is
supervisor
and the default password is
super123$
.
3.
Click
Log In
.
Result: If your login is successful, the D.20 RIO Home page appears.
Remote authentication
Use the following settings to configure your server for use with your D.20 RIO.
Table 15: User account privilege levels
NOTE
Only one root account exists on the D.20 RIO and it is stored locally. While it cannot be
deleted from the system, you can change the password using the D.20 RIO Configuration
Utility.
Table 16: service parameters
D.20 RIO permission level
privilege level
Root
Not applicable (see note)
Administrator
0 to 3
Supervisor
4 to 7
Operator
8 to 11
Observer
12 to 15
D.20 RIO service
parameters
Service
Protocol
Port
Login
d400local
none
console
HMI Access Manager
d400httpd
none
web
SSH
d400sshd
none
22
SFTP
d400sshd
none
22
