CHAPTER 4: SETTING UP THE D.20 RIO
D.20 RIO CONFIGURATION UTILITY
D.20 RIO - HARDWARE USER’S MANUAL
GE Information
43
6.
Type
3
and press
Enter
to select 3. Remove VLAN.
Result: A list of configured VLANs appears.
7.
Remove all created VLAN IDs.
8.
Return to the Available Network Interfaces menu.
9.
Type
2
and press
Enter
to select: 2. Disable LAN Redundancy.
Enabling LAN
redundancy
To enable LAN redundancy if the VLAN is configured in either NET1 or NET2 interfaces:
1.
Connect to the rear maintenance RS-232 port. See “D.20 RIO field and network
connectors” on page 29.
2.
At the
D20RIO#>>
prompt, type
d20riocfg
and press
Enter
.
Result: The D20RIO Configuration Utility menu appears.
3.
Type
3
and press
Enter
to select 3. Configure Network Interfaces.
Result: The Network Interface menu appears.
4.
Type
1
or
2
and press
Enter
to select either 1.Net1 or 2. Net2.
5.
Type
4
and press
Enter
to select 4. VLAN.
6.
Type
3
and press
Enter
to select 3. Remove VLAN.
Result: A list of configured VLANs appears.
7.
Remove all created VLAN IDs.
8.
Return to the Available Network Interfaces menu.
9.
Type
3
and press
Enter
to select: 3. Enable LAN Redundancy.
Configure secure access
The
Configure Secure Access
menu allows you to configure the modes through which
users can access the D.20 RIO.
Configure SSH service
Enable or disable access to the D.20 RIO through the SSH protocol.
Configure web mode
Select if users can access the D.20 RIO web interface through an HTTP connection or if
users should be redirected to an HTTPS connection.
Configure
administrator only
logins
Select if access to command-line utilities is restricted to Administrator-level users or not.
By default, this option is enabled. This setting restricts access to the following services:
•
Login
•
SSH
•
SFTP
