20
GE Information
D.20 RIO - HARDWARE USER’S MANUAL
REQUIRED TOOLS
CHAPTER 2: INSTALLING THE D.20 RIO
Required tools
Before beginning the installation procedures, have the following tools and equipment
available:
•
Appropriate device cables for D.20 connections (GE part number 977-0089)
•
CAT5 network cables for RJ-45 Ethernet connections (GE part number 977-0209 or
equivalent)
•
12 AWG wire (minimum) for protective earth
•
Flathead screwdriver with 0.6 mm by 3.5 mm blade (for terminal block wiring)
•
#1 Phillips screwdriver (for panel or DIN rail mounting the unit)
•
#2 Phillips screwdriver (for rack mounting the unit)
•
Needle-nose pliers
•
Wire cutters
•
Wire strippers
•
1 ring connector, Panduit part number PV10-14R for 12 AWG [3.3 mm²] wire for
protective earth terminal
•
Network settings for the device as provided by your network administrator
•
Windows-based PC with any Windows-based terminal emulation software and Web
browser software installed
Unpacking the D.20 RIO
Carefully remove the D.20 RIO from its packaging. Visually inspect the unit to ensure it has
not sustained any visible damage during transit. If there are visible signs of damage, report
it immediately to the carrier.
Package contents
The following items are provided as part of your D.20 RIO shipment:
•
D.20 RIO unit (GE part number 520-0231); See “D.20 RIO unit dimensions” on page 21.
•
19” rack mounting bracket (GE part number 953-4129)
•
Flat panel mounting bracket (GE part number 953-4132)
•
DIN rail mounting bracket, optional (GE part number 953-4019)
•
Ethernet cable, 60 inch [1.5 m], (GE part number 977-0209/60) for local network
connection
•
Serial null modem cable, 72 inch [1.8 m], (GE part number 977-0529/72) for local
maintenance connection
•
GE Energy Product Documentation CD (GE part number 581-0002)
•
24 VDC Power supply (580-3483) or 48 VDC Power supply (580-3484),
Verify that you have received all items. GE parts include a unique number, typically in the
format XXX-XXXX, that can be used as a reference.
