CHAPTER 2: INSTALLING THE D.20 RIO
CONFIGURING DEVICE OPTIONS
D.20 RIO - HARDWARE USER’S MANUAL
GE Information
21
Figure 1: D.20 RIO unit dimensions
Configuring device options
The following connection options are configured by setting hardware switches and
jumpers on the main board:
•
SW1: D.20 channel 1 to D.20 link port B
•
SW3: D.20 channel 2 to D.20 link port B
•
SW2: End of link termination
•
JP1: Power supply to D.20 connectors
These options should be configured before you permanently mount the device.
The location of these switches and jumpers is shown in “Configuration switches and
jumpers” on page 22.
5.75 in.
(146 mm)
1.71 in.
(43.5 mm)
8.66 in.
(220 mm)
