Establishing computer connection
Action
Step
Turn on ÄKTA ready using the Mains power switch, located on the left side
of the cabinet.
1
Check that the green POWER lamp on the front of the unit lights up (bottom
lamp in figure). The light flashes slowly when communication with UNICORN
is not established.
Switch on the computer and computer screen, and check that a booting
process starts.
2
After booting is finished, check that the UNICORN software is installed and
available (UNICORN symbol visible on the computer’s desktop).
3
Start UNICORN by double-clicking its icon.
Check that the green POWER lamp now shows a steady green light, indicat-
ing that UNICORN recognizes and can communicate with the system unit.
4
72
ÄKTA ready Operating Instructions 28960345 AD
4 Installation
4.6 Connections
