GCC Technologies RX II Series, User Manual

Page: 96 / 229

RX II Series User Manual
Operation
4-19
4.8 Reference Parameter setting for different materials
The following reference parameter is used on GCC verified materials shown in the table.
Material
Personalized/ Wall
stickers
Vehicle stickers Window decoration Window tint
Blade red red red red / yellow
Blade tip length (mm) 0.28 0.27 0.25 0.09
Force (g) 105 85 95 70
Speed (cm/sec) 72 60 65 72
Offset (mm) 0.25 0.25 0.25 0.25
Recommend model
RX, Jaguar, Puma,
EX, AR
RX, Jaguar, Puma,
EX, AR
RX, Jaguar, Puma,
EX, AR
RX, Jaguar, Puma,
EX, AR
Material Stencil Reflective film Flock Cardboard
Blade red / green green green green
Blade tip length (mm) 0.3 0.5 0.3 0.3
Force (g) 180 380 135 165
Speed (cm/sec) 15 3 30 30
Offset (mm) 0.25 / 0.5 0.5 0.5 0.5
Recommend model
RX, Jaguar, Puma,
EX, AR
RX, Jaguar, Puma,
EX
RX, Jaguar, Puma,
EX, AR
RX, Jaguar, Puma,
EX, AR
Material Magnets Protective tint Rhinestone Sandblast mask
Blade green green green blue
Blade tip length (mm) 0.8 0.3 0.8 0.27
Force (g) 580 320 190 85
Speed (cm/sec) 3 3 15 60
Offset (mm) 0.5 0.5 0.5 0.25
Recommend model RX, Jaguar
RX, Jaguar, Puma,
EX
RX, Jaguar, Puma
RX, Jaguar, Puma,
EX, AR
Material Small text (vinyl)
Blade black
Blade tip length (mm) 0.27
Force (g)
thick: 150
thin: 90
Speed (cm/sec) 9
Offset (mm) 0.175
Recommend model RX, Jaguar, Puma