GCC Technologies RX II Series, User Manual

Page: 14 / 229

RX II Series User Manual
Installation 2-1
Chapter 2 Installation
2.1 Precaution
Please read below information carefully before you start installation.

Notice 1

Make sure the power switch is off before installing the cutting plotter.

Carefully handle the cutter to prevent any injuries.

Notice 2 Choosing a proper place before setting up the cutting plotter
Before installing your cutting plotter, select a suitable location, which meets the following
conditions.

The machine can be approached easily from any direction.

Keep enough space for the machine, accessories and supplies.

Keep the working area stable, avoiding sever vibration.
 Keep the temperature between 15 and 30
℃
(60-86
o
F) in the workshop.

The relative humidity of the working environment should be between 25% and
75 % .
 Protecting the machine from dust and strong air current.

Preventing the machine from direct sunlight or extremely bright lighting.

Notice 3 Connecting the Power Supply
Check the plug of the power cord to see if it matches with the wall outlet. If not, please
contact your dealer.

Insert the plug (male) into a grounded power outlet.
 Insert the other end (female) of power cord into the AC connector of cutting
plotter.

Notice 4 Tightening or Loosing Screws with Screwdriver