GCC Technologies RX II Series, User Manual

Page: 9 / 229

RX II Series User Manual
General Information 1-3
1.4 Appearance of RX II Series
1.4.1 The Front View (Figure 1-1)
Control panel
–
consists of 14
control keys and 1 LED and 1 LCM
showing messages and menus.
Cutting Pad
–
provides the
protection of blade when the blade is
cutting.
Tool Carriage
–
performs the
cutting with the installed blade
and pen with AAS module.
Alignment Rulers
–
media can be aligned
with the clear guide line
marks.
Grid Drums
–
move
the media back and
forth during operation.
Slicer Groove
–
slice off the extra
media easily along
this groove.
Platen
–
provides the
surface for holding and
supporting media while
performing cutting.
Figure 1-1