RX II series User Manual
Automatic-Aligning System
5-9
Step 2
Placing the Registration Marks
The AAS Layout Instruction:
* Auto-detection function on the 1
st
mark covers the grey area
Suggested 30mm margin on both left and right sides of media sheet.
Suggested 20~30mm margin on top of media sheet, and at least 50mm margin on
the bottom edge to prevent sheets dropping or any error occurred while media sizing.
Step 3
Print the Graphics
■ Print the graphic and the marks with your printer
(Scaling = 100%).
■ When printing on a roll media, make sure the orientation as following:
Summary of Contents for RX II Series
