Page 1 - 4
Safety
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
1.4 Mechanical safety
W A R N IN G
N ever rem ove or open any guarding or
covers from th e m achine. T hese are
placed for you protection as w ell as
the p rotection of the m achine.
W A R N IN G
N ever place hands, fingers or objects
throu gh any op ening of the side fram e. Y ou r
hand or fingers m ay be pinched or crushed
or you m ay cau se dam ge to the m achine.
W A R N IN G
W hen sw ingin g out or in an unw ind,
keep hands an d fingers aw ay from
the p ivot end. Y our han d or
fingers m ay be pinched.
W A R N IN G
K eep hands an d fingers aw ay from the
ends of the rem ovable id lers w hen
rem oving or in stalling th em at
various locations on the m achine.
1.5 Heating safety
The heating components of the Orca III/ Orca
III T can reach temperatures of over 200
o
F ( 100
o
C ).
D A N G E R
At these temperatures there is a danger of
severe burn if the rolls are touched during
setup, operation or servicing.
In the event of a run away heat failure, the
machine is equipped with a thermal cut off switch.
This switch will remove power to the heating system
before any damage can be caused by the run away
heat failure.
If run aw ay heat failure occurs, call
your local service representative
before using th e m achin e again.
IN F O R M A T IO N
C A U T IO N
N ever leave th e roller in the dow n position
w ithout rolling w hen the rollers are heated.
T his w ill cause dam age to the rollers.
