Page 1 - 8
Safety
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
W A R N IN G
D o n ot operate the m ach ine w ith the
control side or drive side cabinet
in the open position.
E L E C T R IC A L
S H O C K
D o n ot operate the lam in ator if th e pow er
cord is dam aged or frayed. Y ou can be
severely shock ed, electrocuted or cause a
fire. C ontact a qualified electrician to
replace the cord.
T he u pper m ain roller and the up per pull
roller should b e in the raised position.
IN F O R M A T IO N
E L E C T R IC A L
S H O C K
T hese calibrations require the lam inator
to be pow ered up w hile the cabinets
are opened.
1.8 Operation
The following symbols are positioned at
various points in Section 5 Operation.
W A R N I N G
Do not wear ties, loose fit clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
W A R N IN G
W hen the lam inator rollers are in
m otion, keep h ands and fingers
aw ay from the nip of the rollers.
Y ou m ay be C R U SH E D or B U R N E D !
T he lam inator w ill only turn on if
all E -ST O Ps are unlatch ed.
IN F O R M A T IO N
T he center position is to prevent jam m ing
of the m otor w hen changing directions
IN F O R M A T IO N