Operations
Page 5 - 14
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
5.7 Main roller nip
To set the main roller nip for use with
substrates can easily be obtained by setting the shim
dials on the main roller to the desired opening.
a) Ensure the upper main roller is in the up
position.
T he n ip can on ly be changed w ith the
upper roller in the up position.
IN F O R M A T IO N
b) Turn the shim dial to the desired setting.
F ro n t o p e ra tin g p o s itio n
S h im d ia ls
( vie w e d fro m th e to p o f la m in a to r )
c) Adjust main roller pressure for the desired
setting with respect to the substrate being used.
d) Press the main roller UP/ DOWN switch to
DOWN.
5.8 Pull roller nip
To set the pull roller nip for use with substrates
can easily be obtained by setting the shim dials on the
pull roller to the desired opening.
a) Ensure the upper pull roller is in the up
position.
T he n ip can on ly be changed w ith the
upper roller in the up position.
IN F O R M A T IO N
b) Turn the shim dial to the desired setting.
R e a r o p e ra tin g p o s itio n
S h im d is k s
( v ie w e d fro m th e to p o f la m in a to r )
c) Adjust pull roller pressure for the desired
setting with respect to the substrate being used.
d) Press the pull roller UP/ DOWN switch to
DOWN on the rear control panel.
