![background image](http://html.mh-extra.com/html/gbc/orca-iii-t/orca-iii-t_operation-and-maintenance-manual_571024062.webp)
Operations
Page 5 - 11
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
5.5 In case of an emergency
Four E-STOP buttons, two located on the left
and right side from the front operating position and
two located on the left and right side from the rear
operating position. In the event you are unable to reach
an E-STOP, a front and rear E-CABLE is installed
for your safety.
Rear E-CABLE
Front E-CABLE
Rear E-STOP
Front E-STOP
Front E-STOP
Rear E-STOP
a) Press in on any one of the four E-STOP buttons
or press using your foot on either E-CABLE
in the event of an emergency situation.
P u s h
E
M
E
R
G
E
N
C
Y
S
T O
P
W hen a safety feature is engaged, the
upper rollers raise and p ow er to
the d rive m otor is rem oved.
IN F O R M A T IO N
b) Resolve the emergency situation.
c) If an E-STOP was depressed, turn the knob
counter clockwise to disengage the E-STOP
button. If an E-CABLE was pressed, continue
with next step.
T u rn
E
M
E
R
G
E
N
C
Y
S
T O
P
d) On the front control panel, press the main roller
UP/ DOWN switch to the UP position.
P R E S S U R E
R O LL
A D J
10
20
30
40
50
60
70
80
90
100
0
P .S .I.
T he u pper m ain roller U P/ D O W N sw itch
resets the m ain roller to the correct position .
IN F O R M A T IO N
d) Resume running the laminator.