Operations
Page 5 - 16
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
5.11 Shutdown procedure
Perform the steps below to properly shutdown
your machine.
a) Unweb the laminator and clean the rollers as
described in Section 8.2 Cleaning the rollers.
b) Set the left and right shim dials of the main
roller to greater than 1/2 inch ( 1.27 cm ).
T his w ill prevent the m ain rollers from
contacting if th e air shou ld be rem oved.
IN F O R M A T IO N
c) Set the pull roller shim disk to 1/2 inch.
T his w ill prevent the pu ll rollers from
contacting if th e air shou ld be rem oved.
IN F O R M A T IO N
d) Turn the power ON/ OFF switch on the
laminator to OFF.
