68
CARE AND CLEANING
WARNING:
To avoid injury to persons and damage, always turn the appliance off,
wait for the motor to stop completely and unplug the appliance, immediately after ope-
ration and before assembling/disassembling or cleaning the appliance.
WARNING:
Wear oven gloves if processing hot food. Ensure not to get burned on
spilled over liquids or steam.
ATTENTION:
Do not use abrasive cleaners, cleaning pads, corrosive chemicals (dis-
infectants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning,
for this could damage the surfaces. Always handle the entire appliance with care and
without violence.
Cleaning the Blender Jug
1. Empty the blender jug and rise it with warm water.
2. Replace the blender jug on the motorblock and ensure it is securely locked into posi-
tion.
3. Fill the blender jug with warm soapy water. The waterlevel should be high enough
to cover the blade with water but not too high to avoid run over liquids. Close the
lid and turn on the motor on ›5‹. Let the motor run for a few seconds.
4. Turn the motor off, wait for the blade to stop moving and take the blender jug off the
motorblock.
5. Pull the plug out of the power outlet.
6. Take the lid off the blender jug and pour out the water. Stubborn residues you can
remove using a nylon washing brush or sponge.
WARNING:
Pay attention not to cut yourself cleaning around or cleaning the blade.
IMPORTANT:
The blender jug should be clean now. In case that there are stubborn
residues on the blender jug or the blade, disassemble the blender jug and clean the sin-
gle part (see: ›Assembling and disassembling the appliance‹). Soak the parts in warm
soapy water.
7. Clean the lid and the refill lid with soapy water.
8. Rinse the blender jug, the lid, and the refill lid with clear water and dry the parts
thoroughly and carefully with a cloth or leave all parts dry naturally where they are
out of reach of young children.
Note:
The lid, refill lid and blade assembly housing are not dishwasher safe. Ensure to remo-
ve the blade assembly housing and take the lid off the blender jug before placing the
blender jug into the dishwasher.
