57
SOLVING PROBLEMS
If any problems occur during operation, you will find solutions in this section
Problem
Possible Reason
The Solution
The appliance does not
respond. The display remains dark.
The appliance is not live.
Please check:
– Is the appliance connected to the
power supply?
– Is the power outlet live? Check by
connecting a lamp.
The appliance does not respond. The
display only shows a symbol.
The child lock is active.
To deactivate the child lock, press
the buttons PAUSE/STOP and START
simultaneously until a beep sounds.
The appliance does not respond. The
heating compartment is illuminated.
The oven is busy.
While a program is running, only
the button PAUSE/STOP is active.
Wait for the oven to finish or cancel
operation by pressing PAUSE/STOP
twice.
The light within the heating com-
partment remains dark, even during
operation.
The lamp is out of order.
Change the lamp (ovenproof, E14,
15 W) inside the oven. It is located
at the right side of the heating com-
partment. Unscrew the glass protec-
tion to get access.
Steam is accumulating at the oven
door and hot air is coming out.
During operation, steam may escape
and condensate on cooler parts of
the appliance.
This is quite normal. There is no
need to do anything.
You cannot activate the child lock.
The child lock is only avail-able when
the appliance is in standby mode.
Press the PAUSE/STOP button twice to
cancel any still running function. Then
try again
The child lock had been activated,
but now the oven is in standby
mode again.
Meanwhile, the power failed.
If the power is switched on, the oven
starts always in standby mode. Via
power failure or by disconnecting the
oven from power supply, the child lock
will be deactivated.
The display is flashing and the count-
down of the cook-ing time stopped.
You have pressed the PAUSE/STOP
button and thus interrupted opera-
tion.
Press the START button to reassume
operation.
Your food has some burnt spots, alt-
hough you selected time and tempe-
rature correctly.
Check, whether your food is placed
too near to the heating elements.
Always ensure to keep an appropri-
ate distance of at least 3 cm to the
heating elements.
