• Always clean the appliance thoroughly after each use to avoid food baking on the
surfaces and possibly catching fire. However, never use chemicals, abrasive clea-
ners, metal cleaning pads or any hard and sharp objects (i.e. scraper) for clea-
ning to avoid damaging i. e. the glass door, non-stick surfaces, heating elements
and especially the accessory which get in contact with the food. Always pay
attention not to damage the heating elements when cleaning.
Never place the
appliance or any parts of it in an automatic dishwasher.
• Grasp the appliance at both sides at the bottom of the housing for moving it.
HOT SURFACES – RISK OF BURNS
• During operation do not place any objects or tissue on the appliance, to avoid
risk of overheating.
• The exterior of the oven and the glass door will become very hot during operation.
Only touch the door handle and/or control panel of the oven while the appliance
is in use or still hot. Always leave the oven cool down before removing the crumb
tray, cleaning the oven, or moving the oven.
• Be very careful when handling hot dishes, oven accessories or foods. Use oven
gloves and the tray handle for the food tray! Let the appliance and accessories
cool down before cleaning. Do not attempt to move the appliance during ope-
ration.
• During operation, a lot of hot steam can escape from the brim of the oven door.
Especially by opening the oven door. Always keep your hands, face and arms as
well as any clothing and other heat-sensitive objects away from the oven during
operation to avoid scalds and damage.
• Only use dishes, tins and other kitchen utensils which are intended for use in
ovens, e.g. fireproof glass and ceramics or metal items. Do not use airtight con-
tainers as food extends when heated.
• Do not cover the crumb tray or any other parts of the oven with metal foil. This
will cause overheating of the oven.
• Exclusively place accessories such as baking tray, grill rack and pizza stone on
heat resistant surfaces after use.
• Pay attention when moving hot liquids and food to avoid the risk of getting bur-
ned.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
Ensure that the voltage rating of your mains power supply corresponds to the voltage
requirements of the appliance (220/240 V, 50 Hz, AC, rated for 16 A). Always
41