94
19. Engage the filter holder under the brewing head. Remove the steel carafe from
the appliance. Remove the hopper lid.
20. Grasp the appliance at both sides of the housing and, over a large bowl, turn
the appliance upside down. You should expect that some drops of water come
out of the water tank. Holding the appliance in this position, turn the appliance
a little in each direction to make the remaining coffee beans fall out. Thereafter
turn the appliance upright again.
CAUTION
– Always ensure that the bean hopper is kept completely dry,
before filling in coffee beans. Moisture in the bean hopper could clog and dama-
ge the grinder. If any moisture got into the bean hopper, leave the appliance dry
naturally for at least 1/2 day with the hopper lid left open. Do not poke under the
bean guiding cone. The bean guiding cone cannot be removed.
21. If required, wipe the inner side walls of the bean hopper and the hopper lid with
a soft, dry, and fluff-free cloth, but do not poke under the bean guiding cone!
Emptying the Grinder
NOTE
When using the grinder frequently, you do not need to empty the grinder.
However, before storing the appliance (e.g. before a holiday trip; see also: ‘Sto-
rage’), you should empty the grinder as far as possible, by performing the follow-
ing procedure.
22. When the bean hopper is completely empty, the grinder can be emptied too.
Press the opening button “OPEN” to unlock the filter holder and turn the filter
holder to the complete open position.
CAUTION
–
The base plate gets hot immediately when starting a function
via the on/off button. Ensure that neither your hand or arm nor the used vessel
touches the base plate. Do not place the vessel on the base plate.
23. Plug in the appliance and hold a sufficiently large beaker or small bowl directly
under the brewing head.
24. Touch the on/off button twice to agitate the grinder. The grinder starts operation,
processing any coffee beans still left in the grinder inlet and mill.
25. Touch the on/off button to cancel operation, when the working noise changes
audibly or the grinder stops.
