79
NOTE
When leaving your finger on the hours button or minutes button, the display runs
on automatically until you remove your finger.
USING THE TIMER
Via the timer, the brewing cycle can be started at a pre-selected starting time. Using
this feature, your COFFEE MACHINE GRIND & BREW PRO THERMO can wait for
you with freshly brewed coffee, whenever you like.
WARNING
–
When using the timer, the coffee maker starts operation auto-
matically at the pre-selected point in time without any supervision. Always ensu-
re that you have prepared the appliance for operation completely and correctly
according to the instructions given above, before activating timer operation!
Otherwise, hot water and hot coffee could run out and cause severe damage.
IMPORTANT -
Before setting the starting time and activating the timer, you need
to set the internal clock of the appliance (see above: ‘Setting the Internal Clock’).
Setting the Starting Time
13. Hold the timer button touched, until the starting time flashes on the display area.
The default starting time after any interruption of the power supply is “0:00”.
14. Within 2 seconds after switching to the starting time, touch the hours button or
minutes button to set the starting time to the desired value. Each touch of a time
setting button (hour or minute) increments the assigned value by 1.
IMPORTANT -
The starting time flashes for approx. 2 seconds on the display.
During this time period, you can adjust the starting time via the hour button and
minute button. When no button is touched within 2 seconds after the last entry,
the appliance toggles back to the internal clock, and the hour button and minute
button affect the setting of the internal clock only.
Activating the Timer
WARNING
– Before activating the timer, always ensure that the appliance is
prepared for operation correctly and completely (see: ‘Preparing the Appliance for
Operation’). Otherwise, safe operation is not guaranteed.
