77
IMPORTANT -
As long as the appliance is live without interruption, your settings
will be kept in memory. All your individual settings get lost when interrupting the
connection to the power supply and via power failure. In this case the parameters
are reset to factory values. However, there is no influence of the power supply on
the setting of the grind size, selected via the adjusting dial on top of the brewing
head. You should select medium settings for your first experiments.
Adjusting the Grinder
IMPORTANT -
Ensure to switch off the grinder, when using pre-ground coffee pow-
der. Otherwise, the filter could be overfilled and your coffee gets too strong and/
or runs out at the rim of the filter (see: ‘Tips for Best Results’). Grinder operation
is necessary only when using whole coffee beans. In this case, the bean hopper
must be filled first with the appropriate amount of coffee beans (see: ‘Using Whole
Coffee Beans’).
CAUTION
–
Do not fill pre-ground coffee powder into the bean hopper!
Otherwise, the grinder could get blocked and damaged.
Just as with other drip
coffee makers, coffee powder must be filled directly into the filter.
8. If you do not wish to use the grinder and filled pre-ground coffee powder into
the filter already, ensure to switch off the grinder by touching the grinder button.
With the grinder de-activated, the grinder button illuminates red. If you do not
wish to use the timer also, you do not need to make any further settings. Start
the appliance via the on/off button. When the timer shall be used, proceed with
the next section (see: ‘Setting the Internal Clock’).
NOTE
When using the grinder, the COFFEE MACHINE GRIND & BREW PRO THERMO
offers 3 parameters, that can be combined freely for getting your desired results.
For your first steps, you should select a medium grind size.
• The grind size (from coarse to fine) has an influence on the water flow through
the coffee powder and the extraction of flavours. Turn the adjusting dial of the
grinder to the left (small icons) to select a finer grind size, or turn it to the right
(large icons) for getting the coffee powder somewhat coarser.
• In any case, you should adapt the number of cups set at the control panel accor-
ding to the amount of water in the water tank (2, 4, 6, 8 cups). For this, use
the cups button. For your first tries, you should select the amount of water in the
water tank.
