EN
EN
122
123
PREPARATION FOR CLEANING
1. Press the control dial until only dashes are shown on the display areas (see:
‘After Usage’). Unplug the machine.
2. Remove the removable parts (see: ‘After Usage’).
CLEANING THE HOUSING
IMPORTANT -
For getting a stable stand on the work surface, the suction cups
at the feet of the machine must be clean. Usually, you do not need to clean the
suction cups. However, when flour or sticky liquids have been on the work sur-
face, the suction cups may get polluted, causing the machine to excessively move
around during operation. In this case, you should remove any pollution from the
suction cups. For this, always use only soft clothes.
Do not scratch or scrape on
the suction cups.
3. Hold the unlock button at the joint of the mixing arm pressed, while moving the
mixing arm to the upper position. Ensure that the mixing arm engaged securely
in this position.
4. If required, remove any residues and splashes from the drive shafts of the mixing
drive and from the bottom of the mixing arm with a soft, slightly damp cloth. Then
press the unlock button and slowly lower the mixing arm to the operating position.
5. Wipe the housing of the mixer. Avoid dripping any liquids into the joint of the
mixing arm. Wipe any food particles from the power cord.
6. Carefully wipe dry the housing after cleaning.
If required
, carefully clean the
suction cups at the feet of the base plate: For this, the mixing arm must be enga-
ged in the lower operating position. Lay the machine (without mixing tools and
mixing bowl) carefully
onto its left side
. Use a SOFT, damp cloth for cleaning.
After removing any residues, wipe with clear water and thoroughly dry the suc-
tion cups via a soft cloth.
CLEANING THE TOOLS AND ACCESSORIES
IMPORTANT - Do not clean the mincing discs in the automatic dishwasher.
We
recommend to clean the steel mincing discs regularly, even when they have not
been used. This will avoid a rancid or resinous taste and smell. Always rub the
mincing discs with some cooking oil after cleaning.
If you wish to use an auto-
matic dishwasher for cleaning, carefully observe the instructions given in the
following section
(‘Cleaning in the Automatic Dishwasher’).
Problem
Reason
Easy solution
There are residues of food
or liquids within the min-
cer coupling of the mixing
arm.
The processed food has
been too runny and/or
too juicy.
Only process types of food via the mincer, which do not
give off much juices when being pressed. The mincer is
NOT suited for juicing fruit and vegetables. Additionally,
it is not suited for processing any type of runny food. Do
not pour any liquids into the feed chute, while the mincer
is assembled to the mixing arm of the machine.
The screw ring got loose. When assembling the mincer, turn the screw ring some-
what tighter. However, do not turn it with violence. Ensu-
re that the mincer is assembled completely and correctly
(see: ‘Using the Mincer’).
The mincer is not assem-
bled correctly.
Ensure to assemble the mincer completely and correctly accor-
ding to the instructions, before starting operation (see: ‘Using
the Mincer’).
CARE AND CLEANING
WARNING
–
Always ensure that the machine is out of reach of young
children!
Do not hold your hands or any foreign objects (e.g. cooking utensils,
brushes, clothes) onto the moving parts (mixing drive, mixing tools, worm shaft and
cross blade of the mincer), while the machine is connected to the power supply.
Always switch off the motor (press the control dial) and unplug from the mains
power supply, before moving or cleaning the machine. Do not touch the machine
with wet hands or when the machine is wet (e.g. by condensate), while the machi-
ne is connected to the power supply. Do not place the machine on a power cord
or on wet surfaces. Do not immerse the machine or power cord into water or any
other liquid. Do not spill any liquids onto the machine.
CAUTION
– Do not use any hard or sharp-edged objects, corrosive chemicals,
disinfectants, abrasive cleaners, or metal scouring pads for cleaning the machine or
any part of it. Do not poke with any foreign objects in the mincer coupling, mixing
drive, or in the joint of the mixing arm. Do not use violence.
Do not place the machi-
ne or the power cord in an automatic dishwasher. Additionally, some accessori-
es and tools are NOT suited for cleaning via hot water and/or in an automatic
dishwasher
(see below: ‘Cleaning in an Automatic Dishwasher’).