Correction of Pattern
67
①
Display of Interface for Setting the Pitch Length
In the interface of code list, select change pitch
length (code 062)
to activate the
interface for setting the pitch length.
②
In put the Pitch Length
In the interface of changing pitch length, use
number keys (A), +/- Keys (B) to set the changed
pitch length. Press ENTER (C) to display the
interface for specifying the pitch length change
range.
③
Specify the Range of Pitch Length for Changing
Press Backward Key D or Forward Key E to track
the needle entry point. Press ENTER (F) to change
the pitch length of the set range. Then the system
will return to the standard interface.
5-6. Symmetry
Make a pattern symmetrical to the made one. This function is effective to the whole pattern with the existing needle
position at the standard. When operating this function, user shall set the existing needle position to the standard
position.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
