Correction of Pattern
64
①
Selection of Relative Top Point Move
In the interface of code list, select and perform the
Relative Top Point Move (Code 073)
.
②
Specify the position of
Relative Top Point Move
In the specified interface of relative top point
move, use
(B) to move the point. Press
ENTER (C) to activate the confirmation interface
of mechanical control order deletion.
③
Performance of Top Point Move
In the confirmation interface of mechanical control
order deletion, press ENTER (A) to perform the top
point move, and then the system will return to the
standard interface.
When moving relative top point, the whole pattern
data after the moved point moves while holding the
previous relation before that movement
In case of moving the absolute top point: in the
interface of code list, select and perform the
absolute top point move (code 078). At this time
the pattern data after moved point keep still
Attention:The result of point deletion may exceed
the sewing range as a part of the completed pattern
data. So, at this time, please use the correction
function to modify the pattern data to the sewing
range
5-3. Element Deletion (063)
Delete the sewing elements and mechanical orders in the unit of element, the element after the deleted element will
move forward after the deletion.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
