Input of Pattern
51
Input the order to stop sewing machine.
①
Select Sewing Machine Stop
Select the Sewing Machine Stop
to
activate he interface like right.
②
Point Stop Status
Select the needle position at stop from the area A,
the selected key will be displayed in dark.
③
Input the Sewing Machine Stop Order
In the right interface, press ENTER
to input the
order of sewing machine stop. And then the system
will return to the standard interface
Stop position at the highest
position
Needle at up position when
machine stops
Needle at down position
when machine stops
Attention:UP position error will be produced at the time of
sewing when the needle position is set to DOWN position at
the end of sewing or before jump feed. Needle stop is
become invalid when the sewing machine is in the stop state,
and the needle position does not change.
(14) Deletion of Mechanical Control Order (059)
Delete the mechanical control orders on the present position, such as 2
nd
origin, stop at midway, thread-trimming,
upper thread tension setting value and intermediate presser height setting.
①
Select the Deletion of Mechanical Control Order
In the interface of the code list, user shall press
Deletion of Mechanical Control Order (Code
059)
to activate the interface at right
②
Delete the Mechanical Control Order
In the right interface, press
to delete the
mechanical control order. And then the system will
return to the standard interface.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
