Input of Pattern
28
③
Move Needle Position
In the coordinate input interface, user can press
the Direction Key (D) to move the needle in the
pointed direction.
④
Input Position
Move to the pointed position and press Passing
Point Key (E) to have that position inputted as a
shape point (Passing Point).
Or press Confirmation Key (F) to input that
position as an Angle Point.
For angle point, please refer to the “4-9. About
Angle Point”p.57.
⑤
End the Setting of Curve Normal Sewing
Press the ENTER (G) to input the set value. And
the system will return to the standard interface.
User can also input such values by repeating the
operation in step 3 and step 4.
(4) Arc Normal Sewing (025)
After the user fixes two points, the arc connecting that point and the needle position will inputted in the set sewing
stitch length. The sewing direction is determined by the input order of the pointed spots.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
