Instruction on Operation Order
20
When deleting the needle entry point with even
serial number, press
F to move the needle
within the range of the deleted points for
appointment. At here, we just select two
needle-entry points. Appoint the needle to
position E and then press Key G
You can see from the below picture, the selected
points are deleted.
④
Point Adding
In the standard interface, press Keys (A) to move
the needle to position H, and then select
“Absolute Point Adding” (Code 076).
In the position appointment interface, press Keys
(J) to move the position to point I(where we
would like to add a new point.), then press K for
confirmation.
As shown in the picture below the new needle
entry point is added.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
