Input of Pattern
53
①
Select the Automatic Back-tack
In the interface of code list, select the Automatic
Back-tack (code 064)
to activate the
interface for setting the automatic back-tack.
②
Setting of Automatic Back-tack
In the interface for setting the automatic back-tack,
the set stitch number of sewing start is displayed on
Key A, while the set stitch number of sewing end is
displayed on Key B.
Press the button of the item, which is wanted
changing, so as to activate the interface for
inputting the set value. In the interface for setting
stitch number, user can use number Keys (F) or
+/-Keys (G) to set the set the stitch number. Press
ENTER (H) to input the set stitch number and then
the system will return to the interface for setting
automatic back-tack
By using the Selection Key (C&D), user can
determine the type of the back-tack. The selected
type will be displayed in dark. Among these two
keys, the Key C is for V type back-tack, while Key
D for Z type back-tack
After the setting (or without need to change), the
standard interface will be displayed and the
back-tack will be edited as long as ENTER (E) is
pressed
4-7. Condensation Sewing (065)
The specified number of stitches of the sewing start, sewing end, or the both of the element including the present
point is changed to the specified pitch.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
