Pattern Operation
80
Set the scaling rate in advance, so as to load the scaled patterns.
①
Set the Scaling Rate in X Axis
Press X Scaling Rate Setting Key A to display the
interface for setting the Scaling Rate in X axis
The set value of the existing X scaling rate is
displayed on that key.
②
Input the X Scaling Rate
Use number keys (D) or +/- keys (E) to input the
scaling rate. The step of change is 0.01% at each
pressing on +/- keys
Press ENTER (F) to confirm the inputted value,
and then the system return to the pattern load
interface.
③
Set the Scaling Rate in Y Axis
Press Y Scaling Rate Setting Key B to display the
interface for setting the Scaling Rate in Y axis
The set value of the existing Y scaling rate is
displayed on that key..
④
Method for Setting the Scale
For the method of scale, either stitch length
increase/decrease or number of stitches
increase/decrease can be selected
The present setting status is displayed on the
method f selection Key (C). When button C is
pressed, the figure on it will be altered.
On method selection key, the scale method
selected at present is displayed.
:Increase or decrease the stitch number
:Increase or decrease of stitch form length
1. At point sewing, after setting the increase or
decrease of the stitch number, the sewing stitch
form length will also be scaled
2. After scaling rate is set on circle, arc or the
scaling in x/y is repeated, the original shape of
pattern may be unable to be remained due to the
sewing is changed to point sewing. The reason of it
is that the stitch number is changed
(3) Load Pattern Data in Memory or U Disk
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
