Input of Pattern
46
(6) Tension of the 3
rd
Thread (007)
Input tension of the 3
rd
thread.
①
Select Tension of the 3
rd
Thread
In the interface of the code list, select the Tension
of the 3rd Thread (Code 007)
to
activate the right interface.
②
Input Tension of the 3
rd
Thread
In the right interface, press ENTER
to input
the tension of the 3rd thread, and then the system
willl return to the standard interface.
(7) Delay( 010)
To set the external output time.
①
Select Delay
In the interface of the code list, select delay (Code
010)
to activate the interface at
right.
②
Input the Delay Value
In the right interface, input the delay value with the
figure keys (A) or +/- Keys (B). Press
to
input the value and then the system will return to the
standard interface.
(8) Scale the Reference Point (004)
Enable to scale the reference points at any position on the produced pattern. When not setting the scale of reference
point, user can scale the origin.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...