Input of Pattern
35
4-3. Offset Sewing (034
〜
037)
This function is to create the needle entry points off the standard line in a certain distance.
It is easy to sew the small shapes and the like whose outside circle is
the standard line.
There are four kinds of offset sewing
Linear offset sewing(Function Index 034
）
Curve offset sewing
（
Function Index 035
）
Arc offset sewing
（
Function Index 036
）
Circle offset sewing (Function Index 037
）
①
Display of Linear Offset Sewing Setting
Interface
In the interface of code list, select linear offset
sewing (code 034 )
to have access to
the interface for setting linear offset sewing
②
Setting of Linear Offset Sewing
In the interface for setting the linear offset sewing,
the set value of existing sewing stitch length is
displayed at A; the set value of existing offset width
is displayed at B; the set value of existing sewing
speed is shown on C.
Press the button of the item, which is wanted
changing, so as to activate the interface for
inputting the set value. The setting methods of each
item are same to that in the linear normal sewing.
The Keys D & E will determine the direction of the
offset sewing. Pressing Key D is to sew forward at
left of the standard line, while pressing Key E is to
sew forward at the right of the standard line.
:Offset Left Direction
:Offset Right Direction
After the setting (or without need to change), the
coordinate input interface will be displayed as long
as ENTER (F) is pressed
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
