Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A
36
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Figure 1-23 AUX – UTILITY Page
TIMERS
The generic timer can be set to count up or down from a specified time (HH:MM:SS). When the countdown
on the timer reaches zero, the digits begin to count up from zero. If the timer is reset before reaching zero
on a countdown, the digits are reset to the initial value. If the timer is counting up when reset, the digits are
zeroed.
Setting the generic timer (PFD):
1)
Press the
TMR/REF
Softkey.
2)
Turn the large
FMS
Knob to select the TIMER Field (00:00:00).
3)
Turn the small
FMS
Knob to enter the desired time (HH:MM:SS) and press the
ENT
Key.
4)
With the UP/DN Field highlighted, turn the small
FMS
Knob to select the timer counting direction (UP/DN) and
press the
ENT
Key.
5)
With ‘START?’ highlighted, press the
ENT
Key to start the timer. The field changes to ‘STOP?’.
6)
To stop the timer, press the
ENT
Key with ‘STOP?’ highlighted. The field changes to ‘RESET?’.
7)
To reset the timer, press the
ENT
Key with ‘RESET?’ highlighted. The field changes back to ‘START?’ and the
digits are reset.
8)
To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
