Garmin GEA 71 Pilot'S Manual Download Page 232

Page: 232 / 482

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga

190-02692-00 Rev. A

212

FLIGHT MANAGEMENT

STEM

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

An along track offset distance cannot be modified once entered. If the along track offset distance must be

changed, the existing along track offset waypoint must be deleted and a new one created with the new offset
distance.

Figure 5-62 Along Track Offset

Along Track Offset

Waypoint and

Distance

Along Track Offset

Waypoint and Distance

from Flight Plan Waypoint

Entering an along track offset distance:

Press the

FPL

Key.

Push the

FMS

Knob to activate the cursor (not required on the PFD) and turn the large

FMS

Knob to highlight

the waypoint for the along track offset.

Press the

ATK OFST

Softkey (MFD only); or press the

MENU

Key, highlight ‘Create ATK Offset Waypoint’, and

press the

ENT

Key.

Enter a positive or negative offset distance in the range of +/ – 1 to 999 nm (limited by leg distances).

Press the

ENT

Key to create the offset waypoint.

Push the

FMS

Knob to remove the flashing cursor.

Summary of Contents for GEA 71



































































































































































































































































































































































































































































































Search results

Summary of Contents for GEA 71

Reviews:

Brands by name

Popular brands

Garmin GEA 71, Pilot'S Manual

Search results

Summary of Contents for GEA 71

Reviews:

Brands by name

Popular brands