Garmin GEA 71 Pilot'S Manual Download Page 275

Page: 275 / 482

190-02692-00 Rev. A

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga

255

FLIGHT MANAGEMENT

STEM

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Selecting automatic or manual page mode:

From the AUX – TRIP PLANNING Page, press the

AUTO

Softkey or the

MANUAL

Softkey; or press the

MENU

Key, highlight ‘Auto Mode’ or ‘Manual Mode’, and press the

ENT

Key.

Selecting flight plan or waypoint mode:

From the AUX – TRIP PLANNING Page, press the

FPL

Softkey or the

WPTS

Softkey; or press the

MENU

Key,

highlight ‘Flight Plan Mode’ or ‘Waypoints Mode’, and press the

ENT

Key.

Selecting a flight plan and leg for trip statistics:

From the AUX – TRIP PLANNING Page, push the

FMS

Knob to activate the cursor in the flight plan number field.

Turn the small

FMS

Knob to select the desired flight plan number.

Turn the large

FMS

Knob to highlight CUM or REM. The statistics for each leg can be viewed by turning the

small

FMS

Knob to select the desired leg. The Inset Map also displays the selected data.

Selecting waypoints for waypoint mode:

From the AUX – TRIP PLANNING Page, press the

WPTS

Softkey; or press the

MENU

Key, highlight ‘Waypoints

Mode’, and press the

ENT

Key. The cursor is positioned in the waypoint field directly below the FPL Field.

Turn the

FMS

knobs to select the desired waypoint (or select from the Page Menu ‘Set WPT to Present Position’

if that is what is desired), and press the

ENT

Key. The cursor moves to the second waypoint field.

Turn the

FMS

knobs to select the desired waypoint, and press the

ENT

Key. The statistics for the selected leg

are displayed.

In manual page mode, the other eight trip input data fields must be entered by the pilot, in addition to flight

plan and leg selection.

Entering manual data for trip statistics calculations:

From the AUX – TRIP PLANNING Page, press the

MANUAL

Softkey or select ‘Manual Mode’ from the Page

Menu, and press the

ENT

Key. The cursor may now be positioned in any field in the top right two boxes.

Turn the

FMS

Knobs to move the cursor onto the DEP TIME Field and enter the desired value. Press the

ENT

Key. The statistics are calculated using the new value and the cursor moves to the next entry field. Repeat until
all desired values have been entered.

Summary of Contents for GEA 71



































































































































































































































































































































































































































































































Search results

Summary of Contents for GEA 71

Reviews:

Brands by name

Popular brands

Garmin GEA 71, Pilot'S Manual

Search results

Summary of Contents for GEA 71

Reviews:

Brands by name

Popular brands