manualshive.com logo in svg

Garmin GEA 71, Pilot'S Manual

Share
Download
Garmin GEA 71 Pilot'S Manual Download Page 450

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga

190-02692-00  Rev. A

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

430

APPENDIX B

 NOTE

:  

The pilot/operator must review and be familiar with Garmin’s database exclusion list as discussed 

in SAIB CE-14-04 to determine what data may be incomplete.  The database exclusion list can be viewed at 
flygarmin.com by selecting ‘Database Exclusions List.’

 NOTE

:  

The pilot/operator must have access to Garmin and Jeppesen database alerts and consider their 

impact on the intended aircraft operation.  The database alerts can be viewed at flygarmin.com by selecting 
‘Aviation Database Alerts.’

 NOTE

:  

If the pilot/operator wants or needs to adjust the database, contact Garmin Product Support to 

coordinate the revised DQRs.

NAVIGATION DATABASES

The navigation database is updated on a 28-day cycle. There are two possible methods for updating the 

navigation database. If the 28-day cycle of your navigation database has already ended, you must update the 
active navigation database. However, if the expiration date of the navigation database hasn’t already been 
reached, you may load a standby navigation database.  The system will then automatically update the active 
database at the first aircraft power-on when the new navigation  becomes effective. 

The navigation database must be installed from the Jeppesen or user supplied SD data card.  Go to flygarmin.

com or www.jeppesen.com for subscription and update information.  

 NOTE: 

To do this procedure, use a blank SD card to copy the navigation database.  Garmin SD Cards (bottom 

SD card slots) must NOT be used. The use of SanDisk SD Card is recommended to update the navigation 
database file.  Before utilization, it is recommended to format the SD Card with the FAT32 file system so that 
displays will read it.

  NOTE:  

After the navigation database is installed, the card may be removed.

Updating the active navigation database (not using the Dual Navigation Database or Automatic 
Database Synchronization Features):

1) 

Go to flygarmin.com or www.jeppesen.com.  Install the navigation database on a blank SD card.

2) 

With the system OFF, insert the SD card containing the new navigation database version into the top card slot of the 
display (label of SD card facing left).

3) 

Turn the system ON.  A prompt similar to the following is displayed in the upper left corner of the display:

Figure B-1  Standby Navigation Database Prompt

Summary of Contents for GEA 71



































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands