190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
223
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Under certain conditions, some messages may appear when a flight plan is imported or exported.
Flight Plan Import/Export Results
Description
‘Flight plan successfully imported.’
A flight plan file stored on the SD card was successfully imported as a stored flight
plan.
‘File contained user waypoints only.
User waypoints imported successfully.
No stored flight plan data was modified.’
The file stored on the SD card did not contain a flight plan, only user waypoints.
These waypoints have been saved to the system user waypoints. No flight plans
stored in the system have been modified.
‘No flight plan files found to import.’
The SD card contains no flight plan data.
‘Flight plan import failed.’
Flight plan data was not successfully imported from the SD card.
‘Flight plan partially imported.’
Some flight plan waypoints were successfully imported from the SD card, however
others had errors and were not imported. A partial stored flight plan now exists in
the system.
‘File contained user waypoints only.’
The file stored on the SD card did not contain a flight plan, only user waypoints.
One or more of these waypoints did not import successfully.
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than the system can
support. The flight plan was imported with as many waypoints as possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or more waypoints the system cannot
find in the navigation database. The flight plan has been imported, but must be
edited within the system before it can be activated for use.
‘User waypoint database full. Not all
loaded.’
The flight plan file on the SD card contains user waypoints. The quantity of stored
user waypoints has exceeded system capacity, therefore not all the user waypoints
on the SD card have been imported. Any flight plan user waypoints that were not
imported are locked in the flight plan. The flight plan must be edited within the
system before it can be activated for use.
‘One or more user waypoints renamed.’
One or more imported user waypoints were renamed when imported due to
naming conflicts with waypoints already existing in the system.
‘Flight plan contains invalid waypoint(s)’
One or more imported flight plan waypoints is/are invalid or locked (this may occur if
waypoints in the flight plan were removed in a recent database cycle). The imported
flight plan can be deleted or it can be viewed and edited to remove invalid waypoints
prior to use.
‘Flight plan successfully exported.’
The stored flight plan was successfully exported to the SD card.
‘Flight plan export failed.’
The stored flight plan was not successfully exported to the SD card. The SD card
may not have sufficient available memory or the card may have been removed
prematurely.
Table 5-9 Flight Plan Import/Export Messages
