Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A
242
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Figure 5-80 Approach Loading
Loaded Approach
Selected Approach
Procedure Loading Page
Selection Softkeys
Loading an approach into the active flight plan using the PROC Key:
1)
Press the
PROC
Key. The PROCEDURES Window is displayed.
2)
Highlight SELECT APPROACH, and press the
ENT
Key. The PROC – APPROACH LOADING Page is displayed.
3)
Select the airport and approach:
a)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
b)
Select an approach from the list and press the
ENT
Key.
Or
:
a)
If necessary, push the
FMS
Knob to exit the approach list, and use the large
FMS
Knob to move the cursor
to the CHANNEL Field.
b)
Use the
FMS
Knob to enter the approach channel number, and press the
ENT
Key to accept the approach
channel number. The airport and approach are selected.
4)
Select a transition (if required) and press the
ENT
Key.
5)
Minimums
a)
To set approach minimums, turn the small
FMS
Knob to select BARO or TEMP COMP and press the
ENT
Key. Turn the small
FMS
Knob to select the altitude, and press the
ENT
Key.
b)
If TEMP COMP was selected, the cursor moves to the temperature field. Turn the small
FMS
Knob to select
the temperature (as reported at the destination airport), and press the
ENT
Key.
Or
:
To skip setting minimums, select OFF and press the
ENT
Key.
6)
Press the
ENT
Key with LOAD? highlighted to load the approach procedure; or turn the large
FMS
Knob to
highlight ACTIVATE and press the
ENT
Key to load and activate the approach procedure.
When selecting a NAVAID exclusive approach, the popup message is displayed: ‘NOT APPROVED FOR GPS –
GPS guidance is for monitoring only. Load approach?’ With YES highlighted, press the
ENT
Key.
