Garmin DRIVECAM 76, Owner'S Manual

Page: 60 / 64

Connecting the Device to Your Computer
You can connect the device to your computer using a USB cable.
1 Plug the small end of the USB cable into the port on the device.
2 Plug the larger end of the USB cable into a port on your computer.
3 From your Garmin DriveCam device, select Tap to Connect to Computer.
4 When your Garmin DriveCam device prompts you to enter file transfer mode, select Continue.
A picture of your device connected to a computer appears on the device screen.
Depending on your computer operating system, the device appears as either a portable device, a removable
drive, or a removable volume.
Transferring data from your computer
1 Connect the device to your computer ( Connecting the Device to Your Computer, page 54 ).
Depending on your computer operating system, the device appears as either a portable device, a removable
drive, or a removable volume.
2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Browse to a folder on the device.
NOTE: for a removable drive or volume, you should not place files in the Garmin folder.
6 Select Edit > Paste.
Disconnecting the USB cable
If your device is connected to your computer as a removable drive or volume, you must safely disconnect your
device from your computer to avoid data loss. If your device is connected to your Windows computer as a
portable device, it is not necessary to safely disconnect the device.
1 Complete an action:
• For Windows computers, select the Safely Remove Hardware icon in the system tray and select your
device.
• For Apple ® computers, select the device, and select File > Eject.
2 Disconnect the cable from your computer.
Troubleshooting
My video recordings are blurry
• Clean the camera lens ( Cleaning the camera lens, page 52 ).
• Clean the windscreen in front of the camera.
• Verify the area of the windscreen in front of the camera is cleared by the windscreen wipers, and move the
device, if necessary.
54 Troubleshooting