Garmin Cessna Caravan G1000 Manual Download

Page: 351 / 724

190-00709-05 Rev. D

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

337

HAZARD AVOIDANCE

If the selected map range is less than 10 nm, the system automatically removes the weather products from the

map, with the exception of METARS, which remain displayed when METARs are enabled.

Setting up and customizing the Weather Data Link (XM) Page:

Select the Weather Data Link (XM) Page.

Press the

MENU

Key.

With ‘Weather Setup’ highlighted, press the

ENT

Key (Figure 6-4).

Turn the small

FMS

Knob to select ‘Product Group 1’ or ‘Product Group 2’, and press the

ENT

Key (Figure

6-5).

Turn the large

FMS

Knob or press the

ENT

Key to scroll through product selections.

Turn the small

FMS

Knob to scroll through options for each product (ON/OFF, range settings, etc.).

Press the

ENT

Key to select an option.

Press the

FMS

Knob or

CLR

Key to return to the Weather Data Link (XM) Page with the changed settings.

Figure 6-5 Weather Data Link (XM)

Page Setup Menu

Figure 6-4 Weather Data Link

(XM) Page Menu

Restoring default Weather Data Link (XM) Page settings:

Select the Weather Data Link (XM) Page with the

FMS

Knob.

Press the

MENU

Key.

With Weather Setup highlighted, press the

ENT

Key.

Press the

MENU

Key.

Highlight the desired default(s) to restore (all or for selection) and press the

ENT

Key.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands