Garmin G1000 Pilot’s Guide for the Socata TBM 850/900
190-00709-05 Rev. D
484
HAZARD AVOIDANCE
a
ltitUDe
D
isPlay
The pilot can select the volume of airspace in which non-threat and proximity traffic is displayed. TAs
occurring outside of these limits will always be shown.
Changing the altitude range:
1)
On the Traffic Map Page, select the
ALT MODE
Softkey.
2)
Select one of the following Softkeys:
•
ABOVE:
Displays non-threat and proximity traffic from 9000 feet above the aircraft to 2700 feet below the
aircraft. Typically used during climb phase of flight.
•
NORMAL:
Displays non-threat and proximity traffic from 2700 feet above the aircraft to 2700 feet below
the aircraft. Typically used during enroute phase of flight.
•
BELOW:
Displays non-threat and proximity traffic from 2700 feet above the aircraft to 9000 feet below the
aircraft. Typically used during descent phase of flight.
•
UNREST
(unrestricted)
:
All traffic is displayed from 9900 feet above and 9900 feet below the aircraft.
3)
To return to the Traffic Page, select the
BACK
Softkey.
Or
:
1)
Press the
MENU
Key.
2)
Turn the small
FMS
Knob to select one of the following (see softkey description in step 2 above):
•
ABOVE
•
NORMAL
•
BELOW
•
UNRESTRICTED
3)
Select the
ENT
Softkey.
F
light
iD D
isPlay
The Flight IDs of other aircraft (when available) can be enabled for display on the Traffic Map Page
(Figure 6-175). When a flight ID is received, it will appear above or below the corresponding traffic symbol
on the Traffic Map Page when this option is enabled.
