manualshive.com logo in svg

Garmin Cessna Caravan G1000, Manual

Share
Download
Garmin Cessna Caravan G1000 Manual Download Page 347

190-00709-05  Rev. D

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

333

HAZARD AVOIDANCE

For each enabled SiriusXM Weather product which can be shown as a map overlay, the system displays a 

weather product icon and product age.  The product age is the elapsed time (in minutes) since the weather data 
provider compiled the weather product. The product age display does not indicate the age of the information 
contained within the weather product, which can be significantly older than the displayed weather product age.

The SiriusXM Weather service broadcasts weather information at specific intervals (defined in the 

Broadcast 

Rate

 column in Table 6-1).  If for any reason, a product is not refreshed within the 

Broadcast Rate

 intervals 

(see Table 6-1), the system removes the expired data from the display, and shows dashes instead of the product 
age.  This ensures the displayed information is consistent with what is currently being transmitted by the 
SiriusXM Weather service.  If more than half of the expiration time has elapsed, the color of the product age 
changes to yellow.  If data for a weather product is not available, the system displays ‘N/A’ next to the weather 
product symbol instead of the product age.

Table 6-1 shows the weather product symbols, the expiration times and the broadcast rates.  The broadcast 

rate represents the interval at which the SiriusXM Weather service transmits new signals that may or may not 
contain updated weather products.  It does not represent the rate at which the weather information is updated 
or when the Data Link Receiver receives new data.  SiriusXM and its weather data suppliers define and control 
the data update intervals, which are subject to change.

SiriusXM Weather Product

Symbol

Expiration Time 

(Minutes)

Broadcast Rate 

(Minutes)

Next-generation Radar 
(NEXRAD)

30

5 (U.S.)

10 (Canada)

Cloud Top 
(CLD TOP)

60

15 

Echo Top 
(ECHO TOP)

30

7.5 

SiriusXM Lightning 
(LTNG)

30

5 

Cell Movement 
(CELL MOV)

30

12 

SIGMETs/AIRMETs 
(SIG/AIR)

60

12 

Meteorological Aerodrome Report 
(METARs)

90

12 

City Forecast 
(CITY)

90

12 

Surface Analysis 
(SFC)

60

12 

Freezing Levels 
(FRZ LVL)

120

12 

Winds Aloft 
(WIND)

90

12 

County Warnings 
(COUNTY)

60

5 

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands