Garmin Cessna Caravan G1000 Manual Download

Page: 249 / 724

190-00709-05 Rev. D

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

235

FLIGHT MANAGEMENT

Flight plans can be imported from an SD Card or exported to an SD Card from the Stored Flight Plan Page.

Importing a Flight Plan from an SD Card

Insert the SD card containing the flight plan in the top card slot on the MFD.

Press the

FPL

Key to display the Active Flight Plan Page on the MFD.

Turn the small

FMS

Knob to select the Flight Plan Catalog Page.

Press the

FMS

Knob to activate the cursor.

Turn either

FMS

Knob to highlight an empty or existing flight plan.

Press the

IMPORT

Softkey; or press the

MENU

Key, select “Import Flight Plan”, and press the

ENT

Key.

If an empty slot is selected, a list of the available flight plans on the SD card will be displayed.

If an existing flight plan is selected, an “Overwrite existing flight plan? OK or CANCEL” prompt is displayed.
Press the

ENT

Key to choose to overwrite the selected flight plan and see the list of available flight plans on the

SD card. If overwriting the existing flight plan is not desired, select “CANCEL” using the

FMS

Knob, press the

ENT

Key, select another flight plan slot, and press the

IMPORT

Softkey again.

Turn the small

FMS

Knob to highlight the desired flight plan for importing.

Press the

ENT

Key to initiate the import.

Press the

ENT

Key again to confirm the import.

Figure 5-59 Flight Plan Import

Import/Export Softkeys

List of Flight Plans to Import &

Details for the Selected File

Import Successful

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands