Garmin Cessna Caravan G1000 Manual Download

Page: 207 / 724

190-00709-05 Rev. D

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

193

FLIGHT MANAGEMENT

Airways may be displayed on the map at the pilot’s discretion using either a combination of

AIRWAYS

Softkey

selections, or menu selections using the

MENU

Key from the Navigation Map Page. The Airway range can also

be programmed to only display Airways on the MFD when the map range is at or below a specific number.

Displaying/removing airways:

Select the

MAP

Softkey.

Select the

AIRWAYS

Softkey. Both High and Low Altitude Airways are displayed (AIRWY ON).

Select the softkey again to display Low Altitude Airways only (AIRWY LO).

Select the softkey again to display High Altitude Airways only (AIRWY HI).

Select the softkey again to remove High Altitude Airways. No airways are displayed (AIRWAYS).

Press the

MENU

Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.

Press the

ENT

Key. The Map Setup Menu is displayed.

Turn the small

FMS

Knob to select the ‘Airways’ group, and press the

ENT

Key.

Turn the large

FMS

Knob to highlight the ‘AIRWAYS’ field.

Turn the

FMS

Knob to select ‘Off’, ‘All’, ‘LO Only’, or ‘HI Only’, and press the

ENT

Key.

Press the

FMS

Knob to return to the Navigation Map Page.

Figure 5-23 Navigation Map Setup Menu - AIRWAYS Setup

Low Altitude Airway Range
High Altitude Airway Range

Airway Display Selection

Off, All, LO Only, HI Only

The airway range is the maximum map range on which airways are displayed.

Selecting an airway range (LOW ALT AIRWAY or HI ALT AIRWAY):

Press the

MENU

Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.

Press the

ENT

Key. The Map Setup Menu is displayed.

Turn the small

FMS

Knob to select the ‘Airways ’ group, and press the

ENT

Key.

Highlight the ‘LOW ALT AIRWAY’ or ‘HI ALT AIRWAY’ range field.

To change the range setting, turn the small

FMS

Knob to display the range list.

Select the desired range using the small

FMS

Knob.

Press the

ENT

Key.

Press the

FMS

Knob to return to the Navigation Map Page.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands

Garmin Cessna Caravan G1000, Manual

Search results

Summary of Contents for Cessna Caravan G1000

Reviews:

Related manuals for Cessna Caravan G1000

Brands by name

Popular brands