Garmin G1000 Pilot’s Guide for the Socata TBM 850/900
190-00709-05 Rev. D
450
HAZARD AVOIDANCE
• PFD Inset Map
• Navigation Map Page
• Trip Planning Page
• Flight Plan Page
Displaying terrain and obstacle information (maps other than the TAWS-B Page):
1)
Select the
MAP
Softkey (for the PFD Inset Map, select the
INSET
Softkey).
2)
Select the
TERRAIN
Softkey to display terrain and obstacle data.
When TAWS-B is selected on maps other than the TAWS-B Page, an icon to indicate the feature is enabled
for display and a legend with the TAWS-B terrain colors and annunciation window are shown (Figure 6-142).
Figure 6-142 TAWS-B Icon and Legend with Annunciation Window
The Navigation Map Page Setup Menu provides a means in addition to the softkey for enabling/disabling
display of terrain and obstacles. The setup menu also controls the map range settings above which terrain and
obstacle data are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map. For terrain data, the enable/disable function applies only to the MFD, while the
range setting also affects the PFD Inset Map.
Terrain data can be selected for display independently of obstacle data; however, obstacles for which warnings
and cautions are issued are shown when terrain is selected for display and the map range is within the setting
limit.
Maps besides the TAWS-B Page use settings based on those selected for the Navigation Map Page. The
maximum display ranges for obstacles on each map are dependent on the range setting made for the Navigation
Map. If the maximum range for obstacle display on the Navigation Map is adjusted to below 20 nm, the highest
obstacle display range settings on the other applicable maps are also adjusted proportionally.
Customizing terrain and obstacle display on the Navigation Map Page:
1)
Select the Navigation Map Page.
2)
Press the
MENU
Key.
3)
With ‘Map Setup’ highlighted, press the
ENT
Key (Figure 6-143).
4)
Turn the small
FMS
Knob to select the ‘Map’ Group and press the
ENT
Key (Figure 6-144).
5)
Turn the large
FMS
Knob or press the
ENT
Key to scroll through product selections (Figure 6-145).
•
TERRAIN DATA – Turns the display of terrain data on or off and sets maximum range at which terrain is shown
•
OBSTACLE DATA – Turns the display of obstacle data on or off and sets maximum range at which obstacles are shown
