manualshive.com logo in svg

Garmin Cessna Caravan G1000, Manual

The Garmin Cessna Caravan G1000 is a highly advanced aircraft featuring a state-of-the-art Cockpit Reference Manual. This comprehensive manual provides essential guidance for pilots, ensuring safe and efficient operation of the aircraft. Download this manual for free from manualshive.com and explore the full potential of your aircraft today.

Share
Download
background image

Garmin G1000 Pilot’s Guide for the Socata TBM 850/900

190-00709-05  Rev. D

330

HAZARD AVOIDANCE

6.1  SIRIUSXM WEATHER

  WARNING:  

Do not use data link weather information for maneuvering in, near, or around areas of hazardous 

weather.  Information contained within data link weather products may not accurately depict current 
weather conditions.

 WARNING:  

Do not use the indicated data link weather product age to determine the age of the weather 

information shown by the data link weather product.  Due to time delays inherent in gathering and processing 
weather data for data link transmission, the weather information shown by the data link weather product 
may be significantly older than the indicated weather product age.

The GDL 69/69A is a remote-mounted data link satellite receiver.  It provides SiriusXM Weather data to the 

system.  The Multi Function Display (MFD) and the Primary Flight Display (PFD) Inset Navigation Map display 
the graphical weather information and the associated text.  The GDL 69A can also receive SiriusXM Satellite 
Radio entertainment services.  Both weather data and audio entertainment programming operate in the S-band 
frequency range to provide continuous reception capabilities at any altitude throughout North America.

Services from SiriusXM require subscriptions.  For more information on specific service packages, visit www.

siriusxm.com.

ACTIVATING SERVICES

Before SiriusXM Weather can be used, the service must be activated by providing SiriusXM’s customer service 

the coded IDs unique to the installed GDL 69/69A.  The SiriusXM Weather service has a coded Data Radio ID.  
The Data Radio ID must be provided to activate the weather service.  This ID is in the following locations:

• The AUX - XM Information Page on the MFD (Figure 6-1)

• The SiriusXM Activation Instructions included with the Data Link Receiver

• The label on the back of the Data Link Receiver

Contact the installer if the Audio and Data Radio IDs cannot be located.

SiriusXM uses the coded IDs to send an activation signal that allows the system to display weather data and/

or provide audio entertainment programming through the GDL 69/69A.

Establishing an account for SiriusXM services:

1) 

Select the XM Page in the Auxiliary Page Group.

2) 

Press the 

INFO

 Softkey to display the AUX - XM Information Page.

3) 

Note the Data Radio ID (for SiriusXM Weather) and/or the Audio Radio ID (for SiriusXM Satellite Radio).

4) 

Contact SiriusXM customer service through the phone number listed on its website.

5) 

Provide SiriusXM customer service the Data Radio ID and/or Audio Radio ID, in addition to payment information, 
and desired weather product subscription package.

Activating the SiriusXM Weather service:

1) 

  Once a SiriusXM Weather account has been established, select the XM Page in the Auxiliary Page Group.

2) 

Press the 

INFO

 Softkey to display the XM Information Page.

Summary of Contents for Cessna Caravan G1000





















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cessna Caravan G1000

QSC Q-SYS Application Note preview
Q-SYS
Brand: QSC Pages: 4
Optimus 13-1279 Owner'S Manual preview
13-1279
Brand: Optimus Pages: 44
Sony CMT-BX20i Marketing Specifications preview
CMT-BX20i Marketing
Brand: Sony Pages: 2
Sony CMT-BX1 Specifications preview
CMT-BX1
Brand: Sony Pages: 2
Sony CMT-BX1 Operating Instructions preview
CMT-BX1
Brand: Sony Pages: 2
Sony CMT-BX1 Service Manual preview
CMT-BX1
Brand: Sony Pages: 2
Sony CMT EH15 - Micro HI-FI Stereo Music System Operating Instructions preview
CMT EH15 - Micro HI-FI Stereo Music System
Brand: Sony Pages: 2
Sony CHC-CL5MD Specifications preview
CHC-CL5MD
Brand: Sony Pages: 1
Sony CMT-CEP313 Operating Instructions Manual preview
CMT-CEP313
Brand: Sony Pages: 24
Sony CMT-CP100 Operating Instructions Manual preview
CMT-CP100
Brand: Sony Pages: 26
Sony CMT-BX7DAB Operating Instructions Manual preview
CMT-BX7DAB
Brand: Sony Pages: 32
Sony CMT-BX3 Operating Instructions Manual preview
CMT-BX3
Brand: Sony Pages: 32
Sony CMT-BX3R Operating Instructions Manual preview
CMT-BX3R
Brand: Sony Pages: 32
Sony CMT-CP11 Operating Instructions Manual preview
CMT-CP11
Brand: Sony Pages: 36
Sony cmt-bx50bt Operating Instructions Manual preview
cmt-bx50bt
Brand: Sony Pages: 36
Sony CHC-TB10 Operating Instructions Manual preview
CHC-TB10
Brand: Sony Pages: 32
Sony CHC-TB20 Operating Instructions Manual preview
CHC-TB20
Brand: Sony Pages: 36
Sony CMT HPZ7 Operating Instructions Manual preview
CMT HPZ7
Brand: Sony Pages: 40

Brands by name

Popular brands

Load more brands