Garmin aera 560, Pilot'S Manual

Page: 141 / 230

Garmin aera 500 Series Pilot’s Guide 190-01117-02 Rev. C
125
Hazard Avoidance
Overview
GPS Navigation
Flight Planning
Hazar
d A
voidance
Additional F
eatur
es
Appendices
Index
location at the end of the look-ahead time. For example, if traffic is ahead of you and
traveling along the same track but at a slower rate. The motion vector would point
opposite of its indicated direction of flight showing that you are overtaking the traffic.
TargetTrend (GDL 39)
Traffic's
Predicated
Relative Location
in 5 minutes
Traffic Display
Range
Traffic's
Predicated
Relative Location
in 5 minutes
TargetTrend
Look-ahead
Time
Traffic's
Predicated
Relative Location
in 5 minutes
The TargetTrend look-ahead time interval is automatically adjusted from 30 seconds to
five minutes and corresponds to the traffic display range setting. The greater the range
setting, the longer the time interval and vise versa. Refer to the table below for more
details.
Traffic Page Range Ring Settings TargetTrend Look-ahead
.5nm to 2nm 30 seconds
2nm to 6nm 60 seconds
6nm to 12nm 2 minutes
12nm to 40nm 5 minutes
TragetTrend Look-ahead
Motion vector selection is made from the Traffic Page Menu by enabling/disabling
TargetTrend. Absolute vectors are selected by default and are replaced when TargetTrend
is enabled.
Enabling/Disabling TargetTrend:
On the Traffic Page, select
Menu > Enable/Disable Target Trend
.